November 11, 2026 · A Ray of Color
Plenty of Fort Wayne homes still have a den, basement, or spare room wrapped in dark wood paneling from decades ago. It makes a room feel smaller and darker than it is, and painting it is one of the biggest changes you can make to a space. It is also a job that goes wrong when it is treated like a normal wall. Paneling has a slick finish, deep grooves, and a surface that fights ordinary paint. Knowing what the work involves helps you decide whether to tackle it or hand it off.
Why Paneling Is Different From a Wall
Most paneling is coated in a glossy factory finish or a thin veneer, and paint does not grip a shiny surface well. Roll latex paint straight onto it and the coat can peel or scratch off in sheets within months. The surface needs to be cleaned, because decades of cooking residue and dust sit on it, and then scuffed with sanding so the primer has something to hold. Skipping that step is the most common reason a paneling repaint fails.
Primer Does the Heavy Lifting
A bonding primer made for slick surfaces is what makes the topcoat stay. It also blocks the dark tint of the wood, which can show through a light color if it is skipped. Expect to need more than one coat of primer and more than one coat of finish when going from dark paneling to a light color. This is the same logic behind why prep is most of a paint job, just more extreme. Rushing the primer is where the extra cost of a redo comes from.
Deal With the Grooves
The vertical grooves are the part homeowners underestimate. You have two choices. Paint them as they are, which keeps the board-and-batten look but takes careful brushwork to get paint into every channel without drips. Or fill the grooves with a joint compound or a flexible filler, sand them smooth, and prime, which gives a flat wall that looks like drywall. The second route takes more time and more labor, but it changes the room the most. Either way, the grooves are where paint runs and pools, so they need patience.
Expect Seams, Nail Holes, and Gaps
Paneling shifts with humidity, and gaps open at the seams where the sheets meet. Nail holes, dents, and loose trim all show up once the color changes. These get filled, caulked, and sanded before the topcoat. If you are weighing a repaint against taking the paneling down, the wall behind it may need drywall repair either way. If you have a paneled room you are thinking about painting, call Amanda at (260) 229-6818 and we will look at it and tell you honestly what the job takes.

